ITEMS FOR SALE

Below is a list of equipment and various other items that are currently for sale at Far Q Pro. The equipment listed for sale is considered "surplus" and simply needs a new home- although some will remain in service at Far Q until they are sold. Feel free to email or call regarding any of the items listed on this page. Payment and shipping details can be found at the bottom. Please direct email from the "CONTACT" page on this site. Also, if you don't see what you're looking for in the listings below, please feel free to email and ask. This is only a partial listing of the items currently for sale and the item you're seeking may simply not be posted here as of yet. I will gladly respond to any inquiries.

 

If you are seeking information on The Medcraft Letters, Minnesota eBook, please click here.

 

One additional note: Most of these listings have been created using photos that were taken for inventory purposes, so some items may have a little dust, etc. on them. I assure you that these items are cleaned and inspected before they are listed for sale. In many cases I offer to re- inspect and re- test items just so that the buyer and I are 100% certain that the items are in the condition described. You have my personal assurance that I will never ship an item that is not clean or accurately assessed.

Click on the thumbnails below to see larger photos.

 

USED LEXICON MPX 100 DUAL CHANNEL PROCESSOR

 

Even though this MPX 100 is used, it's in fantastic condition. It was purchased as "used" from the original owner in 2002, & has spent all of it's time in racks so it shows very few cosmetic blemishes. This processor delivers with the original power supply & owners manual. It is in 100% functional condition. The MPX 100 is a true dual- channel processor, meaning that it can operate in true "L-R" stereo or in "dual-mono" with two completely independent effects. That ability effectively makes this unit "2- processors- in- one", allowing you to send two separate mono signals in and returning 2 separate mono effects to the mixer. Couple that with 24- bit internal processing, 20- bit A/D & D/A conversion, & a stereo 44.1kHz S/PDIF output & you get an effects processor that's capable of handling any job you throw at it. It also features a software- selectable MIDI Out/Thru port, a headphone output, and 20Hz-20kHz frequency response. Geez! Now that I think about it, if this Lex doesn't sell in the next couple of weeks I'm going to put it back in the rack and keep it for myself!

PRICE: $113.00 USD

CONTACT INFO: FAR Q CONTACT PAGE

LOCATION: DULUTH, MN

SHIPPING INFO: CONTACT SELLER

 

2 USED TASCAM PB-32H PATCH BAYS

Used patch bays in very good condition. All circuits are functional & all connectors are intact. The only cosmetic issues are a little bit of "rack rash" & the pen ink on the front panels. These units are normalled & unbalanced, with 1/4" phono jacks on the front & RCA jacks on the back. Patch bays like these are practically required when working with some mixers- like the Tascam M- 520, etc. Because they are normalled, they are a great way of managing Inserts or "Breakjacks" on mixer channels or racks containing a lot of gear. These were purchased as "used" back in 2005, & have been in the rack as pictured ever since.

PRICE: $37.00 USD EACH

CONTACT INFO: FAR Q CONTACT PAGE

LOCATION: DULUTH, MN

SHIPPING INFO: CONTACT SELLER

 

USED SONY MDSJE330 MINIDISC PLAYER

With remote control. Ships in original box with owners manual. The last time this unit was checked it performed playback perfectly, but was leaving skips in the media when recording. It may just require a cleaning, since that hasn't been done. Skips may also have been caused by choice of "non- Sony" media. In either case, we have 2 of these in the studio here & don't really need them both. If you've got Minidiscs that need to be transferred to another medium, this unit will work great for you. Outputs include analog on RCA plugs & fiber optic ports. Includes original fiber optic cable.

PRICE: $45.00 USD

CONTACT INFO: FAR Q CONTACT PAGE

LOCATION: DULUTH, MN

SHIPPING INFO: CONTACT SELLER

 

USED TEAC A- 4010S STEREO 1/4" OPEN REEL TAPE RECORDER

Man, what a cool open reel this will be! This is another batch purchase acquisition, & it was purchased as "non- functional" in 2006. This recorder runs at 3 3/4 & 7 1/2 ips. It accepts line inputs on RCA plugs & mic inputs on 1/4" phono. It has adjustable mic/line input levels & adjustable output. It records in stereo or will overdub in mono. Here's what I know about condition on this machine. The machine powers up & gives drive on all motors. The heads, externals, & internals have been visually inspected and appear to be in good condition. There is a chunk of plastic missing from one of the Mic Input knob rings. It needs a drive belt, & I suspect that the counter belt may be a little soft. However, a quick Google search shows that the belts are still available as New Old Stock & that the replacement job is an easy one. I bought this as a "project machine" but never got around to working on it myself. My years of experience with TEAC/Tascam equipment tell me that this will be a great running & sounding machine with just a little effort. I will be happy to guide the new owner toward the belts & instructions on the installation. This recorder would be great for adding a "tapie" sound to recordings, & I suspect would make a fine mastering deck as well.

PRICE: $102.00 USD

CONTACT INFO: FAR Q CONTACT PAGE

LOCATION: DULUTH, MN

SHIPPING INFO: CONTACT SELLER

 

USED MICROPHONE STAND- FORKED BASE

Used microphone stand in very good condition. This stand is circled in the photo provided; it is on the far left.

1 Forked Base, 14 1/2"- 24 3/4" Height From Base. $10.00 USD

This short stand is very handy for setting mics on guitar & bass amps, drums, etc. Every studio or stage rig needs mic stands!

PRICE: SEE ABOVE

CONTACT INFO: FAR Q CONTACT PAGE

LOCATION: DULUTH, MN

SHIPPING INFO: CONTACT SELLER

 

USED MICROPHONE CASE

Used mic case in good condition. This is very similar to the SKB cases that are on the market, but this case actually started out as a tool box. There is no manufacturer indicated anywhere on the case itself. Needs a foam insert to hold the mics. This case is in good condition over all. There are a couple of spots on the hinge side where the plastic has worn through, & the previous owner removed the 3- digit combination lock at some point. It's included with the case so that it can be reinstalled if so desired. The hinges, latches, and swing arms are all solid & operational. It just needs a block of foam to house mics again, or would also work well for storing cables, guitar gear, etc.

PRICE: $25.00 USD

CONTACT INFO: FAR Q CONTACT PAGE

LOCATION: DULUTH, MN

SHIPPING INFO: CONTACT SELLER

 

USED KOSS KTR/77 HEADPHONES, NON- FUNCTIONAL

This set of phones worked great, until one day when they just stopped delivering audio. I'm a bit of a "pack- rat" at heart, so I kept them when my initial attempts at repair failed. I never got back around to fixing them, but the last idea I had was that the cable had developed a bad spot somewhere. They have good isolation properties. They are very rugged, & stand up to studio use very well- although I can't say for certain what may have put them out of commission. They worked very well as monitor phones for musician's use during tracking. They have a fixed 1/4" stereo phono plug on a coiled cable. They're offered here- cheap- for anyone who may want to salvage parts for another pair or attempt repair on their own. These are the circled pair in the photo.

PRICE: $5.00 USD

CONTACT INFO: FAR Q CONTACT PAGE

LOCATION: DULUTH, MN

SHIPPING INFO: CONTACT SELLER

 

USED MIDI IN/OUT TO SERIAL CABLE, 12- FOOT

A truly "old school" cable. Used but in perfect shape. This cable has 15- pin male & female serial connectors on the square plug, & two 5- pin MIDI plugs serving as in & out on the other. This cable was used for interfacing a PC and a Tascam IF- 1000, but I'm sure there are quite a few other "retro" applications for it. Total length is a little over 12 feet. This thing was hard to find when I bought it back in 2005, it's probably harder to find one now.

PRICE: $20.00 USD

CONTACT INFO: FAR Q CONTACT PAGE

LOCATION: DULUTH, MN

SHIPPING INFO: CONTACT SELLER

 

HEADPHONE DISTRIBUTION BOX

Used & visually inspected only, but working when it was received. Mono inputs/outputs. Has space & components for 2 mono inputs, but only one is actively wired. THIS IS NOT A HEADPHONE AMPLIFIER! This box takes signal from your headphone monitor source (ie. an AUX send from your mixer) & routes it to 5 mono outputs. These outputs can be used to feed the inputs of multiple headphone amps, & can be switched off when not in use. Unit is rack width, & occupies 2 rack spaces. Chassis is aluminum. Item is used.

PRICE: $10.00 USD

CONTACT INFO: FAR Q CONTACT PAGE

LOCATION: DULUTH, MN

SHIPPING INFO: CONTACT SELLER

 

USED SPEAKER/AMP DISTRIBUTION BOX

This device was originally used to "dummyload" speaker outputs on guitar amps to achieve a line input for recording, but most of its components have been stripped leaving this "blank" chassis that can be used to house a new circuit. 1 male XLR jack remains & is included. Vented top design, & holes have been punched for four 1/4" jacks- 2 in front & 2 in back. Dimensions: 6 3/8" L X 9 5/8" W X 5" H. If you've got an electronics project that needs a can, this could be just the item for you.

PRICE: $5.00 USD

CONTACT INFO: FAR Q CONTACT PAGE

LOCATION: DULUTH, MN

SHIPPING INFO: CONTACT SELLER

 

USED PAIR OF HEADPHONE JACK BOXES

These boxes can be used to distribute headphone signal from a headphone amp- or signal from an amp to studio monitors- to various locations throughout a studio space. Each box is 1 5/8" L X 3 7/8" W X 2" D. Each has two 1/4" mono jacks. Wire them up, mount them to a wall, and you're ready to go. Can be wired in series/parallel or as in/out. Very handy at this price for managing a larger recording space.

PRICE: $5.00 USD

CONTACT INFO: FAR Q CONTACT PAGE

LOCATION: DULUTH, MN

SHIPPING INFO: CONTACT SELLER

 

USED 12" GUITAR SPEAKER-UNKNOWN MANUFACTURER

Only identifying mark is a number on the frame: S20009 137 509. This speaker has a "Jensen- esque" look to the cone design & judging from the magnet size should handle 30 to 50 watts of power at its tested 8 ohm rating. Would serve well as a backup speaker for a guitar amp, a low cost option to re- speakering an amp, or a test speaker for checking out enclosures or amp repairs.

PRICE: $25.00 USD

CONTACT INFO: FAR Q CONTACT PAGE

LOCATION: DULUTH, MN

SHIPPING INFO: CONTACT SELLER

 

USED 12" ALNICO GUITAR SPEAKER-UNKNOWN MANUFACTURER

There are several identifying marks on this speaker, but no manufacturer is indicated. There are 2 numbers stamped on the frame: 285928 & 15865. The "horseshoe" magnet is stamped with D513-024706 & B34 inside a circle which may be an inspection mark. The back of the cone is stamped 42-H-1802 in white ink. The multimeter indicates 8- ohm resistance on this speaker, & considering the type & size of the magnet it should handle 15 to 30 watts of power. Would serve well as a backup speaker for a guitar amp, a low cost option to re- speakering an amp, or a test speaker for checking out enclosures or amp repairs. These Alnico speakers are considered desirable by many guitar players because of their tendency to "break up" and add to an overdriven sound.

PRICE: $25.00 USD

CONTACT INFO: FAR Q CONTACT PAGE

LOCATION: DULUTH, MN

SHIPPING INFO: CONTACT SELLER

 

USED UNIVERSITY SOUND MIS- 4 HI/MID HORN

Used horn in good operational condition. This driver was acquired as "used" in a batch sale in 2005, & has been in storage ever since. My idea for this horn was to hook it up to a Furman HA- 6 that was monitoring studio talkback & use it for open air communication from the control room. Like most folks, I always wondered why studios had wall speakers & headphone talkback- until I started having to shout "Put on your headphones!" through 6 inch soundproofed walls! At any rate, this horn is rated for 7.5 watts at 4 ohms, & would be great for replacing a blown version of the same, studio talkback, or maybe even a DIY security system.

PRICE: $20.00 USD

CONTACT INFO: FAR Q CONTACT PAGE

LOCATION: DULUTH, MN

SHIPPING INFO: CONTACT SELLER

 

PREFERRED PAYMENT

Preferred payment is cash, PayPal transfer, credit card, money order, or cashiers check. Personal checks accepted with prior approval and with understanding that appropriate time for clearance must be allowed- typically 2 to 3 weeks. Visa, Mastercard, American Express, or Discover card payments are accepted via PayPal. Please email to request PayPal account or credit card payment information. No PayPal account is necessary for credit card payments.

SHIPPING CHARGES

In some cases, specific shipping arrangements are listed in the item description so read carefully. In general, shipping is via UPS or USPS based on "best way" protocols.

TERMS & CONDITIONS

All sales are final, and all items are offered for sale in "as is" condition. No refunds or returns will be provided on any sale, and no warranty- either written or implied- is offered on any item. Any and all damages to merchandise during shipping shall be the sole responsibility of the purchaser, with the exception of items shipped with insurance coverage, in which case liability becomes the responsibility of the vendor providing shipping services. Most items are shipped with standard insurance coverage up to $100.00USD. Additional coverage may be requested, with additional charges to be paid by the purchaser.